ISR Performance Radiator Fan Mounting Kit

The ISR Performance radiator fan mounting kit is the small but necessary hardware for attaching an electric cooling fan to a radiator. It is listed under universal parts and under 240SX cooling because it is one of those items you end up needing whenever a factory shroud is gone, an aftermarket radiator has no fan provisions, or an engine swap has left the stock fan setup behind. Rather than improvising with zip ties, this kit gives you a purpose-made way to secure the fan to the core.

When you need one

• Fitting an electric fan to an aftermarket aluminum radiator with no mounting tabs
• Replacing a mechanical clutch fan after an engine swap
• Adding a pusher or puller fan to a 240SX (S13 or S14) that has lost its factory shroud
• Rebuilding a budget drift car cooling setup without fabricating brackets

Application

Universal mounting kit from ISR Performance, suitable for electric radiator fans on a wide range of vehicles including the Nissan 240SX. Check that the kit matches your fan and radiator before ordering, and confirm the contents against your fan's mounting requirements.

Usage notes

Position the fan so it covers as much of the core as possible and does not rub on the fins once tightened. Do not overtighten, since the core is easily damaged. Route the fan wiring clear of belts and hot exhaust components. Listed weight is approximately 1 lb.

All ISR Performance products are designed for off-road use only.