ISR Performance - 240sx S13/14 -Weld in Transmission Tunnel Clearance kit

Big swap transmissions do not fit under a stock 240SX tunnel. The ISR Performance weld-in transmission tunnel clearance plate for the Nissan 240SX S13 and S14 is the clean way to make room for a CD009, T56 or R154: cut the factory tunnel, weld in the laser cut steel plate, and gain the clearance the bellhousing and shifter need without beating the sheet metal with a hammer.

Why a Weld-In Plate

• Produces a tidy, structural tunnel instead of a hammered and dented one
• Gives predictable clearance for the bellhousing and shifter on common swap gearboxes
• Laser cut steel for a consistent fit and easy welding

Fitment

Nissan 240SX S13 and S14 chassis. Intended for swaps using larger transmissions such as the Nissan CD009, GM T56 and Toyota R154.

Installation

This is a weld-in part. Test fit your transmission with the ISR swap mounts installed, mark the tunnel, cut, then weld the plate in place and seal the seams before refitting the carpet and console.

Pairs With

Works alongside the ISR LS, JZ and RB swap mount kits for the 240SX, which locate the transmission in the position this plate is designed to clear.

All ISR Performance products are designed for off-road use only.