ISR Performance Eccentric Lockout Kit - Nissan 240sx 89-94

The ISR Performance eccentric lockout kit for the 1989 to 1994 Nissan 240SX S13 and Skyline R32 removes the factory eccentric camber and toe bolts and replaces them with fixed stainless plates. The stock eccentrics are a known weak point on these chassis: under hard cornering loads they rotate, and your carefully set rear alignment walks away from where you left it.

How it works

The factory adjusters rely on friction to hold their setting. Once that friction is overcome by lateral load, the cam rotates and toe or camber changes without warning. The lockout plates capture the bolt so it cannot shift, locking the arm position permanently.

• Lockout plates machined from stainless steel
• Grade 10.9 hardware supplied for a no-slip clamp
• Deletes the factory eccentric bolts entirely

Fitment

Nissan 240SX S13 (1989 to 1994) and Nissan Skyline R32.

Important requirement

Once the eccentrics are deleted, the stock arms have no adjustment left. You must already have adjustable rear control arms (camber and toe) installed so you can dial in the alignment after fitting this kit. Plan on an alignment after installation.

All ISR Performance products are designed for off-road use only.